Supplied, Manufactured & Exported by Sailesh Metal Corporation.

Avesta 253MA Equivalent, Avesta 253 MA Welding Rod, Avesta 253MA Material, Avesta 253 MA Stainless Steel, Avesta 253 MA Wire, Avesta 253MA Step Shaft,  Avesta 253MA Tube,  Avesta 253MA Pie-shaped, Avesta 253MA Ring, Avesta 253MA Module Large valves, Avesta 253MA Other Profiled forgings Avesta 253MA Plates Supplier, Avesta 253 MA Bars Manufacturer, Avesta 253MA Equivalent, Avesta 253 MA Welding rod, Avesta 253MA material, Avesta 253 MA stainless steel, Avesta 253MA Wire in Mumbai, Maharashtra, India.

Avesta 253MA, use is primarily designed for welding the high temperature stainless steel  253d for furnaces, combustion chambers and burners. Both the steel and filler metal offers excellent resistance to oxidation up to 1100°C.

The chemical composition of Avesta 253MA is balanced to give a crack resistant weld metal. The steel often forms a rather thick oxide in welding or hot rolling and oxidized plates and welds must be brushed or ground clean before welding.

The resistance of a cloth to high-temperature corrosion is in lots of circumstances depending on its ability to form a protective oxide layer. In a reducing environment, when such a layer can’t be created , the corrosion resistance of the material will be determined by its alloy content. Although not designed for aqueous corrosion resistance the excessive chromium and nitrogen contents give the grade a pitting resistance approximating that of 316.

It is beneficial that the material be solution treated after 10-20% cold work to achieve maximum creep energy in service. 253MA will turn out to be sensitised within the temperature range of °C; this is not a problem for top temperature purposes, but will end in decreased aqueous corrosion resistance. 253MA has excessive power at elevated temperatures so is usually used for structural and stress-containing functions at temperatures above about 500°C and up to about 900°C. Its power at these temperatures is larger than that of options such as Grade 310. Carburisation – Under oxidising circumstances this grade can perform nicely, but alloys with larger nickel content material are most popular if the ambiance is decreasing.

Avesta 253MA, Avesta 253MA Supplier, Avesta 253MA Manufacturer, Avetsa 253MA Exporter.


Sailesh Metal Corporation AVESTA 253 MA

AVESTA 253 MA Manufacturer

Sailesh Metal Corporation AVESTA 253MA Manufacturer

AVESTA 253 MA Supplier

Sailesh Metal Corporation AVESTA 253 MA Supplier

AVESTA 253 MA Exporter

Sailesh Metal Corporation AVESTA 253 MA Exporter

Chemical Composition




≤ %


≤ %


≤ %


≤ %

0.05-0.12 1.40-2.50 1.00 0.045 0.015








20.0-22.0 10.0-12.0 0.12-0.20 0.03-0.08


Mechanical Properties

Hardness HB 30

≤ HB

0.2% Yield strength Rp

≥ N/mm²

Tensile strength R N/mm²  


Elongation A

≥ %

210 310 650-850 40
Modulus of elasticity kN/mm²


Physical Properties

Density: 0.282 lb/in³   Melting Range: 2500 – 2610°F   Poisson’s Ratio: 0.31

Temperature, °F 70 200 400 600 800 1000 1200 1400 1600 1800
Coefficient of Thermal Expansion, in/in°F x 10-6 9.06 9.34 9.59 9.81 9.97 10.14 10.3 10.5 10.8
Modulus of Elasticity, Dynamic, psi x 106 29.0 26.8 24.4 21.7 20.2 18.7 17.6
Thermal Conductivity, Btu • ft/ft2 • hr °F 8.38 10.1 11.7 13.0 14.0 16.6

AVESTA 253MA is also searched as

AVESTA 253MA material, AVESTA 253MA stainless steel, AVESTA 253MA equivalent, AVESTA 253MA properties, AVESTA 253MA welding rod, AVESTA 253MA welding wire, AVESTA 253MA chemical composition.


  • Excellent oxidation resistance through 2000°F
  • High creep – rupture strength
  • Excellent resistance to thermal shock
  • Good weldability


  • Pulverized coal burners in power boilers
  • Petrochemical, refinery and steam tube hangers
  • Radiant tubes for steel/aluminum annealing
  • Recuperates
  • Thermal oxidizers
  • Expansion bellows
  • Furnace fans, dampers
  • Fluidized bed combustor cyclones
  • Rotary kilns and calciners
  • Refractory anchors