SS904L FASTENERS
ASTM B673, B677, B674 TP 904L Stainless Steel EFW/ Welded/ Fabricated/ Seamless Pipes & Tubes Stainless steel fasteners are used extensively throughout industry for both original equipment manufacture as well as for replacement. The stainless steel fastener materials are identified as the B8 class of alloys and are identified in the ASTM Specification A193/193M (Standard Specification for Alloy Steel and Stainless Steel Bolting Materials for High Temperature Service). The corresponding nut specification is ASTM Specification A194/194M.
ASTM A193 / A194 STAINLESS STEEL FASTENERS SPECIFICATION
Standard : DIN, ASTM, BS and all International Standards
Specification : ASTM A193 B8, B8M, B6, B8T, B8C, A194 G8, 8M, 8C, 8T
Length : 3 mm to 200 mm
Bolt / Screw Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Nuts Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Washers Size : M3 – M56 | 3/6″ to 2″ | Custom Sizes
Machine Screws Size : M1.6 – M12
Size : M02 to M33
Grades : 304, 304L, 316, 316L, 309, 310, 317L, 321, 347, 409, 410, 420, 430, 446, 202 etc.
Types : Bolts, Nuts, Screws, Sockets, Studs, Screw, Hex Set Screw, Socket Screw, Cap Screw, Pan Head Screw, Machine Screw, Socket Head Cap Screw, Allen Cap screw, Wing Screw, Washers, Spring Washers, Studs, Anchors, Marine Anchors, Nut, Hexagon Nut, Hex Nut, Hex Coupling Nut, Hex Domed Cap Nuts, Square Nut, Stud Bolts, Hex Head Bolts, Socket Hexagon Head Screw Anchor Bolt, U- Bolts, J Bolts, Mushroom Head Square Neck Bolts, T-Head Bolts, Wing Screw, Eye Bolt, Foundation Bolts, Structural Bolts.
SS904L PIPES,SHEETS AND PLATES
STAINLESS STEEL 904L FASTENERS EQUIVALENT GRADE
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | KS | AFNOR | EN |
| SS 904L | 1.4539 | N08904 | SUS 890L | 904S13 | STS 317J5L | Z2 NCDU 25-20 | X1NiCrMoCu25-20-5 |
SS 904L FASTENERS CHEMICAL COMPOSITION
| Grade | C | Mn | Si | P | S | Cr | Ni | Mo | Cu |
| SS 904L | 0.02 max | 2.0 max | 1.0 max | 0.045 max | 0.035 max | 19 – 23 | 23 – 28 | 4 – 5 | 1 – 2 |
STAINLESS STEEL 904L FASTENERS MECHANICAL PROPERTIES
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| SS 904L | 8.05 g/cm3 | 1350 °C (2460 °F) | Psi – 71000 , MPa – 490 | Psi – 32000 , MPa – 220 | 35 % |